BJPXX - SCOTCH-WELD EPOXY ADHESIVE 1750A ALUMINUM

Product Identification

Product ID:SCOTCH-WELD EPOXY ADHESIVE 1750A ALUMINUM
MSDS Date:11/01/1985
FSC:8040
NIIN:00-181-7548
Kit Part:Y
MSDS Number: BJPXX

Responsible Party
3M CO. ADHESIVES COATINGS AND SEALERS DIV.
3M CENTER
ST. PAUL, MN 55144
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 04963

Contractor
3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

Ingredients

POLYAMIDE RESIN

Fraction By Weight: 87.0%


TREATED CLAY AND SILICA

Fraction By Weight: 13.0%

Hazards

Health Hazards Acute and Chronic:EYE CONTACT: DIRECT CONTACT COULD
PRODUCE SEVERE EYE IRRITATION. SKIN CONTACT: CONTACT WITH SKIN MAY
PRODUCE MODERATE IRRITATION. MAY CAUSE SENSITIZATION IN CERTAIN
SUSCEPTIBLE INDIVIDUALS. INHALATION : NO SOLVENT VAPORS. INGESTION:
LOW TOXICITY VIA INGESTION.

First Aid

First Aid:EYE CONTACT: FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 10
MIN AND CALL A PHYSICIAN. SKIN CONTACT: WASH WITH SOAP AND WATER.
INHALATION AND INGESTION: NOT APPLICABLE.

Fire Fighting

Extinguishing Media:CO2, FOAM, DRY CHEMICALS.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:VENTILATE CONFINED AREAS. COLLECT SPILLED
MATERIAL AND PLACE IN A SUITABLE METAL CONTAINER.

Exposure Controls

Respiratory Protection:AVOID INHALATION OR EYE CONTACT WITH DUST FROM
GRINDING OPERATIONS ON THE CURED MATERIAL.
Ventilation:CURING OVENS SHOULD BE VENTED TO THE OUTDOORS.
Protective Gloves:YES
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:AVOID EYE AND SKIN CONTACT.
Supplemental Safety and Health
*VISCOSITY: 100,000 TO 600,000 CPS.

Chemical Properties

Spec Gravity:.95
Viscosity:*
Solubility in Water:NIL
Appearance and Odor:AMBER PASTE/AMINE ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
PRODUCE CO, CO2 AND NITROGEN DECOMPOSITION PRODUCTS INCLUDING HCN.

Disposal

Waste Disposal Methods:DISPOSE OF THE CURED TWO-PART MIXTURE IN A
SANITARY LANDFILL. INCINERATE UNCURED WASTE IN A PERMITTED
HAZARDOUS WASTE FACILITY CAPABLE OF MEETING APPLICABLE REGULATORY
REQUIREMENT FOR DESTRUCTION AND REMOVAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.